Armark Solar ☀️ LED Street Lighting

Product Details

Product Family: Armark Solar LED

Product Type: Solar LED Street Lighting

Warranty: 3 Years

Main Features

  • Highly Cost-effective
  • Installation straight on to column
  • No Cables, Ducting or Groundworks Required
  • 50 Hours Constant Use Without Charge
  • Battery and All Control in Lantern Head
  • Three Intelligent Modes
  • IP66 all Alloy Structure
  • Time Control
  • Light Sensor Control
  • Dusk to Dawn Auto Sensing
  • Motion Sensor Control
  • >160lm/W


Wireless remote control, adjusts lighting time, light output and sensitivity for automatic detection from one unit to optimise battery lifetime and outputs.


Optically controlled microwave induction and infrared sensor, provides automatic adjustment of intelligent power on, providing additional power savings for extended cloudy days.


True constant current rather than current-limiting control, ensures smooth and stable output current, effectively reducing LED light attenuation to extend LED service life.

Stand Alone Control System

Intelligent controller for all adjustments and variations works through microwave sensor.



Pre Set
Light Levels


Presence Control Provides Increase of Light Level to Your Requirements


Three Intelligent Modes


Motion activated lighting when motion is detected for security light and to save battery.


20% lighting for saving power when no motion, until motion activated.


Automatically turns off in daylight and goes into recharge mode.


Q: Is there any light degradation/drop off as battery begins to lose charge, or are light outputs maintained until failure?

A: No degradation, light output is maintained until failure.

Q: If battery level is low from constant rainy days, will lamp continue to run at a dimmed percentage, if there’s not enough power in the battery to switch to full output?

A: If the battery level is low, the lamp will be turned off automatically.

Q: Can batteries be pre charged before fitting, or if stored for a while, before fitting / how is this achieved?

A: There is no battery charging interface on the luminaire, Armadillo will pre-charge all units prior to install.

Q: If the solar battery as an example is at 33% of maximum charge, will the luminaire still deliver maximum output without degradation?

A: Yes, the lamp will continue at maximum set output.

Q; Does it require a Separate Solar Panel or Battery Pack?

A: All is integral to the luminaire itself, no external requirements.

Q: Does the Lamp have a dusk till dawn sensor?

A: Yes, as standard.

Q: Does the product have a motion sensor?

A: Yes, as standard.

Q: Can motion sensor be adjusted?

A: Yes, to suit time of activation required.

Q: Is it possible to set the minimum light level?

A: Yes it is, from 10% to 40%, as a standby output.

Q: Are the dimming levels adjustable?

A: Yes, we can pre-set to your requirements at factory, or additional option to adjust on site by remote hand held programmers to each unit.