Amethyst LED™ Industrial Lighting

Product Details

Product Family: Amethyst LED™ Industrial

Product Type: Flood Light – High Mast – Canopy

Warranty: 5 Years

Main Features

  • L80 B10 @ 75.000 hours
  • Size from 30W up to 300W
  • 7 Types of Brackets
  • IP66 and IK10 Rated
  • 5 Year Warranty
  • Replaceable Modules (requires only a screwdriver)
  • Replaceable Power Supply
  • Dimmable: (1-10V; DALI 1~255/10~100%)
  • Power Factor > 0.92 Low Current
  • Easy Assembly – Fit and Forget
  • Many Proven Installations and Case Studies

ArmadilloLED – Evolution In Lighting Amethyst LED™ Industrial Luminaire – Between 30W-300W – ONE lamp – SEVEN types of bracket. Robust Heavy Duty LED design, sizes from 30W up to 300W. IP66 and IK10 Rated. High Grade Aluminium Alloy 6063-T5 used for LED Modules. Enhanced optics and use of the CREE XP-G2 range of high output LED chips delivers outstanding results.


  • FLA – Flood Light Arm
  • HLB – Hi Low Bay
  • CRM – Canopy Recess Mounted
  • CSM – Canopy Surface Mounted
  • FLT – Flood Light Tilt
  • WM – Wall Mounted
  • LPM – Lamp Post Mounted

7 Brackets

Multiple Applications

The large choice of bracket options enables the AmethystLED™ to be suitable for various applications including high masts, petrol station canopies and general flood lighting. Enhanced optics and use of the latest CREE XPG2 range of high output LED chips delivers, at last, a genuine, cost effective LED flood light solution.

Unique Optics

A class leading design from one of the UK’s top LED lighting manufacturers. LED technology with higher system efficacy achieving up to 60% or more energy savings than typical conventional HPS lighting solutions. Unique optics and photometric designs optimize the light distribution to comply with safety and road lighting standards in terms of illuminance, luminance, uniformity, glare control etc.

IP66 Rated

IP66 Rated for high protection against dust and water. Chlorine tested for use in swimming pool areas. Salt mist tested. Selection of made to order CCT – KELVIN range – standard 5000K – Options 3000K, 4000K (+/-250K.) Critical failure protection. Two Independent power supplies for lamps 150W – 300W as standard.

The UK’s number one manufacturer for petrol station canopy lighting

Product Features

Wide Wattage Options

Wide wattage options – 30W minimum and 300W maximum, based on 30W each replaceable module.

Quality and performance (UL: E364004)

High reliability and high performance LED Roadway Luminaire including LED power supply – LED electronic driver. UL LED Luminaire listed (E364004). Mechanical structure and thermal management. Unique heat sink which enables better air ventilation, heat dissipation, and dust resistance. Top assured safety and performance – UL E364004, FCC, CSA, TUV-GS CE, CB, RoHS, LM-79, LM-80.

Seven Types of Brackets
  • FLA – Flood Light Arm
  • HLB – High Low Bay
  • CRM – Canopy Recessed Mounted
  • CSM – Canopy Surface Mounted
  • FLT – Flood Light Tilt
  • WM – Wall Mounted
  • LPM – Lamp Post Mounted
Optics & photometrics

Unique optics solution optimises the light distribution to comply with road lighting standards. Available for almost all types of road or area illumination applications, including Type I, II, III and Type IV light distribution. Compliance with ME, CE and S lighting classes. Compliance with BS EN 60598-1. Unique optics and photometrics design optimize the light distribution to comply with safety and road lighting standards in terms of illuminance, luminance, uniformity, glare control etc., successfully retrofitting HPS road lighting solutions.

Tailored solution - at no additional cost

Lamp housing body colour White Gloss (Other colours – made to order at no additional cost). Selection of Made to order CCT – KELVIN range – standard 5000K – Options 3000K, 4000K (*/-250K). Choose from input voltage solutions – 120~277Vac, 220~240Vac, 347-480Vac. Optional UNIQUE 480V+ Single / Three Phase Voltage protection (switch-off to stand by – 15 sec. restart mode). Dry-Freeze / Store Upgrade -50C.

Case Studies